Cooling Tower for Water Chiller
1. Water Cooling Tower Introduction
Aumax AMC Series cooling tower is a device that uses water as a circulating coolant to absorb heat from the system into the atmosphere to reduce the temperature of the water. Cooling is the exchange of cold and heat generated by the use of water and air, as well as heat evaporation and convection heat exchange Evaporation and radiation heat transfer. The waste heat generated by the air conditioner reduces the evaporator heat dissipation of the water temperature and ensures the normal operation of the system.
2.Water Cooling Tower Parameter (Specifications)
|
Model |
Flow Rate (m³/h)) |
Inlet Water Pressure(Kpa) |
Measurement (mm) |
Fan Diameter (mm) |
Motor Power ( KW ) |
Inlet Pipe Diameter (mm) |
Outlet Pipe Diameter (mm) |
|
|
|
|
|
Height |
Diameter |
|
|
|
|
|
AMC-6T |
6 |
1500 |
730 |
400 |
0.18 |
40 |
40 |
|
|
AMC-8T |
8 |
19.6 |
1550 |
950 |
500 |
0.18 |
40 |
40 |
|
AMC-10T |
10 |
19.6 |
1650 |
950 |
500 |
0.18 |
40 |
40 |
|
AMC-12T |
12 |
19.6 |
1700 |
1150 |
550 |
0.25 |
40 |
50 |
|
AMC-16T |
16 |
19.6 |
1850 |
1150 |
600 |
0.25 |
40 |
50 |
|
AMC-20T |
20 |
25 |
1950 |
1350 |
700 |
0.37 |
50 |
65 |
|
AMC-25T |
25 |
25 |
2050 |
1400 |
700 |
0.37 |
50 |
65 |
|
AMC-30T |
30 |
27 |
2200 |
1540 |
730 |
0.55 |
50 |
65 |
|
AMC-40T |
40 |
27 |
2300 |
1600 |
800 |
0.75 |
50 |
65 |
|
AMC-50T |
50 |
27 |
2550 |
1900 |
900 |
1.1 |
80 |
100 |
|
AMC-60T |
60 |
28 |
2650 |
2100 |
1200 |
1.5 |
80 |
100 |
|
AMC-70T |
70 |
28 |
2650 |
2100 |
1200 |
1.5 |
80 |
100 |
|
AMC-80T |
80 |
28 |
2750 |
2350 |
1500 |
3 |
100 |
125 |
|
AMC-100T |
100 |
29 |
2850 |
2900 |
1500 |
3 |
125 |
150 |
|
AMC-125T |
125 |
29 |
2850 |
2900 |
1500 |
3 |
125 |
150 |
|
AMC-135T |
135 |
29 |
3615 |
3190 |
1800 |
3 |
135 |
150 |
|
AMC-150T |
150 |
34 |
3805 |
3780 |
2000 |
4 |
150 |
200 |
|
AMC-175T |
180 |
34 |
3900 |
3780 |
2000 |
4 |
150 |
200 |
|
AMC-200T |
200 |
35 |
4595 |
4460 |
2800 |
5.5 |
200 |
250 |
|
AMC-250T |
250 |
35 |
4610 |
4460 |
2800 |
5.5 |
200 |
250 |
|
AMC-300T |
300 |
39 |
5450 |
4705 |
3400 |
7.5 |
250 |
300 |
|
AMC-350T |
350 |
39 |
5450 |
5205 |
3400 |
7.5 |
250 |
300 |
Please excuse for not note if some specifications of products are changed!
Note：The standard power supply is 3Ø, 380V, 50HZ. Other power supply is available
3. Water Cooling Tower Features & Application
1. Reliability: The unique and rational design of the external turbine is installed outside the cooling tower fan tube for easy maintenance and repair. The structure is the same as the traditional cooling tower motor and gearbox. The mechanical noise and failure rate of the traditional motor are eliminated, and the operation is stable and reliable. High sex.
2. Cooling efficiency guarantee of water cooling tower: As the season changes, the cooling system will change. The unique design of the external turbine has three brake valves so that the fan speed increases or decreases with the increase or decrease of the circulating water flow, and the air volume also increases or decreases, so that the air-water ratio of the cooling tower is stable in a good state, and a good operating effect is achieved;
3. Energy saving: Make full use of the return water pressure of the circulating water system to convert it into mechanical energy, and the external hydraulic turbine replaces the motor drive, achieving 100% energy saving.
4. Environmental protection: After the external turbine replaces the motor, it reduces mechanical noise and vibration and reduces user energy.
5. Safety: Fundamentally put an end to the faults of motor, electric control and leakage and burn damage, and provide a guarantee for safe and continuous operation, and can operate safely in any environment that requires explosion protection.
4. Water Cooling Tower Qualification
Aumax Plast has been focusing on R&D and manufacturing of plastic recycling machine and auxiliary equipment for injection molding machine, blowing molding machine and plastic extrusion line for more than 15years.
We have obtained various domestic and foreign certifications such as IS09001, ISO14001, CE, etc., which fully demonstrates that our products fully comply with international standards and the quality of products is guaranteed.
5. Delivery, Shipping and Serving
Normally, the delivery time of our plastic machines is 10-20 days after order confirmed and advance payment. Most of our products are packed in plywood cases. For small machines like Vacuum Autoloaders are packed in corrugated case. Usually, we ship large machines by LCL or FCL ocean shipping. Sometimes, customers need machine urgently, we ship machine by air or express.
6. FAQ
1. Q: What is the MOQ?
A: The MOQ is 1 set for all products..
2. Q: Where is the loading port?
A: The nearest port to our factory is port of Ningbo, China, as well as we can send machine to Yiwu, Shanghai, Guangdong or any other cities in China.
3. Q: What are the payment terms?
A: The preferential payment term is T/T, while other payment terms are negotiable.
4. Q: What are your terms of delivery?
A: We accept FOB, CFR, CIF, EXW, and DDU. You can choose the terms which is the most convenient and cost effective to you.
5. Q: How does your factory carry out quality control?
A: Powerful R&D teams and professional QC department take care of every detail during design, processing, assembling, testing and packing.
6. Q: Can you supply OEM and customized products?
A: Yes, we can supply OEM / ODM service. Our engineers have rich experience in design and production of plastic auxiliary equipment. We can supply special products according to your ideas and drawings.
7. Q: What about warranty terms?
A: We provide one year warranty for all of our products. During warranty period, if any machine parts damaged due to quality, we will send the new parts by courier immediately by free of charge. Also, we supply 24 hours online service and technical support.