Screw Type Industrial Chiller are a classification of industrial chillers, which can change the temperature of the surrounding environment and are widely used in food, electroplating, plastic and other production industries.
1. The correct starting sequence of screw chiller should be: first turn on the chilled water pump, then turn on the cooling water pump, after the two water circulation systems are operating normally, press the start button on the control panel of the chiller, and press the compressor after a delay of three minutes The sequence starts automatically;
2. When using a Screw Type Industrial Chiller, the refrigeration compressor can only be started after the freezing water system and the cooling water system are operating normally;
3. Don't adjust the freezing water temperature too low. On the premise of meeting the requirements of use, adjust the freezing water temperature of the chiller as high as possible;
4. The operator can overhaul and maintain the compressor according to the actual hours of use, and can run one refrigeration circuit and stop the other circuit for overhaul;
5. If it is not an emergency, it is not allowed to shut down the unit by cutting off the main power supply; if a short-term shutdown is required (less than 7 days)
